|
Product Details:
|
| Material: | Stainless Steel,Cast Iron | Appliion: | Industrial Automation, Hydraulic Systems, Mobile Machinery |
|---|---|---|---|
| Brand: | Rexroth | Standard: | International Standard |
| Delivery: | 3-5 Days | Waranty: | 6-12 Months |
| High Light: | OEM steering unit danfoss,150N0045 steering unit danfoss |
||
Elephant Fluid Power provide Hanjiu Brand OSPB 315 ON - G1/2 Dynapac Road roller steering unit danfooss 150N0045
Hanjiu hydraulic steering units -----8 types,such as BZZ / 101 / 101S / 101S-5T / 102/103/060/109 series,
match the brand :OSPB,OSPC,OSPM series
M+S:HKU/HKUS
Charlynn/eaton:40/45 series,3,6,10series
Specifiion:
| Parameters | Series 101*-***-**-* |
||||||||||
| Function code | 1,2,3 | 1,3 | |||||||||
| Displacement (mL/r) | 50 | 63 | 80 | 100 | 125 | 160 | 200 | 250 | 280 | 315 | 400 |
| Rated Flow (L/min) | 5 | 6 | 8 | 10 | 12.5 | 16 | 20 | 25 | 28 | 31.5 | 40 |
| Max.input pressure(Mpa) | 17.5 | ||||||||||
| Max.cont.back pressure | 2.5 | ||||||||||
| Weight(kg) | 5.7 | 5.76 | 5.84 | 5.91 | 6.05 | 6.25 | 6.45 | 6.68 | 6.86 | 7.06 | 7.45 |
| Dimension L (mm) | 130 | 132 | 134 | 137 | 140 | 145 | 150 | 156 | 161 | 166 | 176 |
Common causes of failure and troubleshooting
| ProbleM | Causes | Troubleshooting |
| Oil leakage on the joint surface between the steering unit rear cover, stator and valve body | rear cover stator bolt looseness (or uneven force), or O-rings damaged | Evenly tighten the bolt, replace the seal |
| Oil leakage at steering shaft | Excessive wear or damage of the seal ring at the shaft of steering unit | Replace new seal |
| feels light when turn the steering wheel slowly, feels heavy when turn the steering wheel quickly | Insufficient oil supply from the oil pump to the steering unit | Check whether the oil pump is working properly (including liquid level, oil pump efficiency, pipeline smoothness, etc.) |
| There is foam in the oil, irregular sound, the steering wheel turns and the cylinder does not move | There is air in the steering system |
Eliminating the air in the system, Check the suction pipe leaks or not, Or if the return nozzle is below the liquid level |
| Heavy steering continues to occur | The oil in the tank is below the specified position | Add oil to prescribed height |
| Oil viscosity is too high | Use oil as required | |
| Fast and slow steering wheels are both heavy, and there is no pressure on steering | Check valve of the P and T fails |
Check the ball. If the steel ball is missing, then insert the steel ball; If the ball gets stuck dirty, it should be cleaned; In both cases, it is necessary to check the effectiveness of the sealing tape recovery. |
| No load or light load turns light, increase load turns to heavy | Relief valve is of system's pressure lower than required value | Adjust the pressure of the relief valve to the specified value (but not more than 16 MPa) |
| Relief valve stucked by dirt, Or spring failure,Or seal is damaged | Clean the relief valve (check the effectiveness of the sealing tape), or replace the spring or sealing ring | |
| Steering wheel cannot be automatically centered | Spring broken or deformation | Replace with new spring |
| Steering wheel rotates or swings left and right automatically | Rotor and the linkage shaft are in the wrong position |
Stop immediately! Align the rotor and linkage shaft |
| Can not reach an end position | Low pressure on relief valve | Properly increase the pressure of the safety valve (it is best to adjust with a pressure gauge) |
| After turning to the end, the steering wheel can still be easily turned | Low pressure on shock valves | Properly increase shock valves pressure (it is best to adjust with a pressure gauge) |
| when machine is off, turn the wheel, cylinder not move | radial clearance or axial clearance is too large between radial and stator | Replace rotor and stator |
| Low viscosity of oil | Change oil | |
| Slow cylinder action | shock valves failure (ball caught by dirty, or spring failure, or seal damage) | Clean shock valves, replace spring or seal |
| Pressure of Steering system not able to be adjusted | Spring broken | Replace the spring |
| Safety valve sealing quality is not high | Replacement parts | |
| Spool blocked | Take out, check, and refurbish | |
| Poor spool action | Check whether the spool is blocked | |
| Spring bent or too soft | Replace the spring | |
| Oil is not clean and the spool hole is blocked | Replace clean oil and clear spool holes |
Appliions:
Steering units have widely appliions, such as conveyor drives, agricultural machines, construction machines, transmission and lift equioment, etc.
Elephant fluid power Co., Ltd. is a professional manufacturer of steering unit. Our factory has dozens of highly qualified and professional engineers and technicians, and introduced many advanced machines in 2010. The production facilities are large-scale factories in northern China and produce more than 300,000 units each year.
Our factory specializes in designing and producing any type of motor and steering gear required by our customers, from large to small, from low to high displacement. And can replace Danfoss, Eaton, M + S series models. Products are widely used in engineering machinery, mining machinery, metallurgical machinery, petroleum machinery, agricultural machinery, injection molding machinery, fishery machinery and other fields.
Please do not hesitate to contact us for further information, inquiries or orders.
Contact Person: Mr. Han
Fax: 86-311-6812-3061
